<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<metadata>
<idinfo>
<citation>
<citeinfo>
<origin>North Carolina Floodplain Mapping Program, North Carolina Division of Emergency Management</origin>
<pubdate>200707</pubdate>
<title>MapFldHazAr (Flood Hazard Polygons), Davie County, NC, 2007</title>
<geoform Sync="TRUE">vector digital data</geoform>
<pubinfo>
<pubplace>Raleigh, NC</pubplace>
<publish>North Carolina Floodplain Mapping Program, North Carolina Division of Emergency Management</publish>
</pubinfo>
<ftname Sync="TRUE">test_vector.DAVIE.flood_mapfldhazar</ftname>
<onlink Sync="TRUE">Service=sde:sqlserver:svr_gis_main; Database=davie_vector; User=davie; Version=sde.DEFAULT</onlink>
</citeinfo>
</citation>
<descript>
<abstract>MapFldHazAr is a GIS shapefile representing the area within the flood mapping boundaries defined by the engineering models for the 100 year, 500 year and floodway. The MapFldHazAr spatial table contains information about the flood hazard within the study area. These zones are used by FEMA to designate the Special Flood Hazard Area (SFHA), identify areas of coastal high hazard flooding, and for insurance rating purposes. These data are the flood hazard areas that are or will be depicted on the FIRM.</abstract>
<purpose>These data were collected and derived by the North Carolina Floodplain Mapping Program (www.ncfloodmaps.com) as part of its effort to modernize FEMA Flood Insurance Rate Maps (FIRM) statewide. The North Carolina Floodplain Mapping Program was established through a Cooperating Technical State (CTS) agreement with FEMA in response to the extensive damage caused by Hurricane Floyd in 1999.</purpose>
<langdata Sync="TRUE">en</langdata>
</descript>
<timeperd>
<timeinfo>
<sngdate>
<caldate>200707</caldate>
</sngdate>
</timeinfo>
<current>publication date</current>
</timeperd>
<status>
<progress>Complete</progress>
<update>As needed</update>
</status>
<spdom>
<bounding>
<westbc>-80.788229</westbc>
<eastbc>-80.290426</eastbc>
<northbc>35.557504</northbc>
<southbc>35.181223</southbc>
</bounding>
<lboundng>
<leftbc Sync="TRUE">1493929.822917</leftbc>
<rightbc Sync="TRUE">1595691.114583</rightbc>
<bottombc Sync="TRUE">728542.354167</bottombc>
<topbc Sync="TRUE">844929.718750</topbc>
</lboundng>
</spdom>
<keywords>
<theme>
<themekt>None</themekt>
<themekey>Map Flood Hazard Area</themekey>
<themekey>Floodplain Boundaries</themekey>
<themekey>100 Year Flood</themekey>
<themekey>500 Year Flood</themekey>
<themekey>1% annual chance flood hazard</themekey>
<themekey>0.2% annual chance flood hazard</themekey>
<themekey>DFIRM</themekey>
<themekey>Digital Flood Insurance Rate Map</themekey>
<themekey>FIRM</themekey>
<themekey>Flood Insurance Rate Map</themekey>
<themekey>Floodway</themekey>
<themekey>Riverine flooding</themekey>
<themekey>Special Flood Hazard Area</themekey>
<themekey>Coastal flooding</themekey>
</theme>
<place>
<placekt>North Carolina Atlas &amp; Gazetteer (Yarmouth, Maine: DeLorme, 2001).</placekt>
<placekey>Davie County, Town of Bermuda Run, Town of Bermuda Run Extraterritorial Jurisdiction, Town of Cooleemee, Town of Mocksville, Town of Mocksville Extraterritorial Jurisdiction, North Carolina</placekey>
</place>
</keywords>
<accconst>None</accconst>
<useconst>These data were created with the highest consideration of accuracy and data integrity. However, as with all other geospatial datasets, users must take into consideration the consequences of using the data for specific applications, business processes, decisions, and map display. For example, surface conditions may have changed in some areas since the initial data was captured. A full metadata record is provided to help the user understand the date, map scale and accuracy standard applied in the collection and data development process. The data should not be used without full review and comprehension of the metadata. Acknowledgement of the North Carolina Floodplain Mapping Program is appreciated when using the data set. Data further derived from this data set should be fully documented using the federal metadata standard and listed via the NC Geospatial Data Clearinghouse.</useconst>
<ptcontac>
<cntinfo>
<cntorgp>
<cntorg>North Carolina Floodplain Mapping Program, NC DEM</cntorg>
<cntper>John Dorman</cntper>
</cntorgp>
<cntpos>Director</cntpos>
<cntaddr>
<addrtype>physical address</addrtype>
<address>1812 Tillery Place, Suite 105</address>
<city>Raleigh</city>
<state>NC</state>
<postal>27604</postal>
</cntaddr>
<cntvoice>919-715-5711</cntvoice>
<cntfax>919-715-0408</cntfax>
</cntinfo>
</ptcontac>
<native Sync="TRUE">Microsoft Windows 2000 Version 5.0 (Build 2195) Service Pack 4; ESRI ArcCatalog 9.2.2.1350</native>
<crossref>
<citeinfo>
<origin>Federal Emergency Management Agency</origin>
<pubdate>Unknown</pubdate>
<pubtime>Unknown</pubtime>
<title>Flood Insurance Study, DAVIE COUNTY, NC</title>
<geoform>document</geoform>
<pubinfo>
<pubplace>Washington, DC</pubplace>
<publish>FEMA</publish>
</pubinfo>
<onlink>www.fema.gov</onlink>
</citeinfo>
</crossref>
<crossref>
<citeinfo>
<origin>Federal Emergency Management Agency</origin>
<pubdate>Unknown</pubdate>
<pubtime>Unknown</pubtime>
<title>Flood Insurance Study, DAVIE COUNTY, NC</title>
<geoform>raster digital data</geoform>
<pubinfo>
<pubplace>Washington, DC</pubplace>
<publish>FEMA</publish>
</pubinfo>
<onlink>www.fema.gov</onlink>
</citeinfo>
</crossref>
<crossref>
<citeinfo>
<origin>Federal Emergency Management Agency</origin>
<pubdate>Unknown</pubdate>
<pubtime>Unknown</pubtime>
<title>Flood Insurance Study, DAVIE COUNTY, NC</title>
<geoform>map</geoform>
<pubinfo>
<pubplace>Washington, DC</pubplace>
<publish>FEMA</publish>
</pubinfo>
<onlink>www.fema.gov</onlink>
</citeinfo>
</crossref>
<natvform Sync="TRUE">SDE Feature Class</natvform>
</idinfo>
<dataqual>
<logic>None</logic>
<complete>None</complete>
<lineage>
<srcinfo>
<srccite>
<citeinfo>
<origin>Watershed Concepts</origin>
<pubdate>200707</pubdate>
<title>MapFldHazAr</title>
</citeinfo>
</srccite>
<typesrc>Feature class</typesrc>
<srctime>
<timeinfo>
<sngdate>
<caldate>200707</caldate>
</sngdate>
</timeinfo>
<srccurr>publication date</srccurr>
</srctime>
<srccitea>STUDY4</srccitea>
<srccontr>
For streams restudied by detailed and limited detail methods, the 1% and 0.2% annual chance floodplains were 0using flood elevations determined at each cross section. Between cross sections, the boundaries were interpolated using topographic data acquired using airborne LIDAR. This LIDAR data was acquired during the winter 2000-2001 flying season.
The topographic data satisfies a vertical root-mean-square error (RMSE) accuracy standard of 20cm (1.3 feet accuracy at the 95% confidence limit) for the Outer Banks and 25 cm (1.6 feet accuracy at the 95% confidence limit) for those portions of the basin lying west of the Outer Banks. These data could be contoured at roughly a 2-foot vertical contour interval. All elevations were referenced to the NAVD 88 and reflect orthometric heights. Variably spaced, bare-earth digital topographic data in ASCII point file format were combined with imagery (either flown concurrently with the LIDAR data or using existing digital orthophotos) to establish a Triangulated Irregular Network (TIN) of digital elevation points, which include selected breaklines to be used for hydraulic modeling. Furthermore, a uniformly spaced sampling of the TIN resulted in uniformly spaced Digital Elevation Models (DEMs), with 20 ft x 20 ft post spacing, which was generated in multiple file formats.
For coastal floodplains, after analyzing wave heights along each transect, wave elevations were interpolated between transects. Various source data were used in the interpolation, including topographic data described above. Controlling features affecting the elevations were identified and considered in relation to their positions at particular transect and their variation between transects.
The 1% annual chance floodplain boundary corresponds to the boundary of the areas of special flood hazards (Zones VE, AO, AH, A99, AR, A, and AE), and the 0.2% annual chance floodplain boundary corresponds to the boundary of areas of moderate flood hazards. In cases where the 1% and 0.2% annual chance floodplain boundaries are close together, only the 1% annual chance floodplain boundaries have been shown.
The floodways were computed for certain stream segments on the basis of equal conveyance reduction from each side of the floodplain. Floodway widths were
computed at cross sections. Between cross sections, the floodway boundaries were interpolated. The computed floodway is shown on the FIRM. In cases where the floodway and 1% annual chance floodplain boundaries are either close together or collinear, only the floodway boundary is shown.
</srccontr>
</srcinfo>
<procstep>
<procdesc>
For streams restudied by detailed and limited detail methods, the 1% and 0.2% annual chance floodplains were delineated using flood elevations determined at each cross section. Between cross sections, the boundaries were interpolated using topographic data acquired using airborne LIDAR. This LIDAR data was acquired during the winter 2000-2001 flying season.
The topographic data satisfies a vertical root-mean-square error (RMSE) accuracy standard of 20cm (1.3 feet accuracy at the 95% confidence limit) for the Outer Banks and 25 cm (1.6 feet accuracy at the 95% confidence limit) for those portions of the basin lying west of the Outer Banks. These data could be contoured at roughly a 2-foot vertical contour interval. All elevations were referenced to the NAVD 88 and reflect orthometric heights. Variably spaced, bare-earth digital topographic data in ASCII point file format were combined with imagery (either flown concurrently with the LIDAR data or using existing digital orthophotos) to establish a Triangulated Irregular Network (TIN) of digital elevation points, which include selected breaklines to be used for hydraulic modeling. Furthermore, a uniformly spaced sampling of the TIN resulted in uniformly spaced Digital Elevation Models (DEMs), with 20 ft x 20 ft post spacing, which was generated in multiple file formats.
For coastal floodplains, after analyzing wave heights along each transect, wave elevations were interpolated between transects. Various source data were used in the interpolation, including topographic data described above. Controlling features affecting the elevations were identified and considered in relation to their positions at particular transect and their variation between transects.
The 1% annual chance floodplain boundary corresponds to the boundary of the areas of special flood hazards (Zones VE, AO, AH, A99, AR, A, and AE), and the 0.2% annual chance floodplain boundary corresponds to the boundary of areas of moderate flood hazards. In cases where the 1% and 0.2% annual chance floodplain boundaries are close together, only the 1% annual chance floodplain boundaries have been shown.
The floodways were computed for certain stream segments on the basis of equal conveyance reduction from each side of the floodplain. Floodway widths were
computed at cross sections. Between cross sections, the floodway boundaries were interpolated. The computed floodway is shown on the FIRM. In cases where the floodway and 1% annual chance floodplain boundaries are either close together or collinear, only the floodway boundary is shown.
</procdesc>
<procdate>Unknown</procdate>
</procstep>
<procstep>
<procdesc>Metadata imported.</procdesc>
</procstep>
<procstep>
<procdesc>Metadata imported.</procdesc>
<srcused>S:\DOCUME~1\kplum\LOCALS~1\Temp\b\xml4.tmp</srcused>
</procstep>
<procstep>
<procdesc>Metadata imported.</procdesc>
<srcused>S:\DOCUME~1\kplum\LOCALS~1\Temp\3\xml57.tmp</srcused>
</procstep>
<procstep>
<procdesc Sync="TRUE">Metadata imported.</procdesc>
<srcused Sync="TRUE">S:\DOCUME~1\kplum\LOCALS~1\Temp\7\xml14.tmp</srcused>
<date Sync="TRUE">20070524</date>
<time Sync="TRUE">09555000</time>
</procstep>
<procstep>
<procdesc Sync="TRUE">Dataset copied.</procdesc>
<srcused Sync="TRUE">Server=SVR_GIS_MAIN; Service=5153; Database=test_vector; User=davie; Version=sde.DEFAULT</srcused>
<date Sync="TRUE">20080805</date>
<time Sync="TRUE">21491100</time>
</procstep>
<procstep>
<procdesc Sync="TRUE">Dataset copied.</procdesc>
<srcused Sync="TRUE">Service=sde:sqlserver:svr_gis_main; Database=davie_vector; User=davie; Version=sde.DEFAULT</srcused>
<procdate Sync="TRUE">20100302</procdate>
<proctime Sync="TRUE">09294200</proctime>
</procstep>
<procstep>
<procdesc Sync="TRUE">Dataset copied.</procdesc>
<srcused Sync="TRUE">\\SVR_GIS_MAIN\D$\FileGDBs\davie_vector_030210.gdb</srcused>
<procdate Sync="TRUE">20100302</procdate>
<proctime Sync="TRUE">11015700</proctime>
</procstep>
</lineage>
</dataqual>
<spdoinfo>
<direct Sync="TRUE">Vector</direct>
<ptvctinf>
<sdtsterm Name="test_vector.DAVIE.flood_mapfldhazar">
<sdtstype Sync="TRUE">G-polygon</sdtstype>
<ptvctcnt Sync="TRUE">79</ptvctcnt>
</sdtsterm>
<esriterm Name="test_vector.DAVIE.flood_mapfldhazar">
<efeatyp Sync="TRUE">Simple</efeatyp>
<efeageom Sync="TRUE">Polygon</efeageom>
<esritopo Sync="TRUE">FALSE</esritopo>
<efeacnt Sync="TRUE">79</efeacnt>
<spindex Sync="TRUE">TRUE</spindex>
<linrefer Sync="TRUE">FALSE</linrefer>
<XYRank Sync="TRUE">1</XYRank>
<ZRank Sync="TRUE">1</ZRank>
<topoWeight Sync="TRUE">5.000000</topoWeight>
<validateEvents Sync="TRUE">FALSE</validateEvents>
<partTopoRules>
<topoRuleID Sync="TRUE">16</topoRuleID>
</partTopoRules>
<partTopoRules>
<topoRuleID Sync="TRUE">17</topoRuleID>
</partTopoRules>
<partTopoRules>
<topoRuleID Sync="TRUE">18</topoRuleID>
</partTopoRules>
<partTopoRules>
<topoRuleID Sync="TRUE">27</topoRuleID>
</partTopoRules>
</esriterm>
</ptvctinf>
</spdoinfo>
<spref>
<horizsys>
<planar>
<planci>
<plance Sync="TRUE">coordinate pair</plance>
<coordrep>
<absres Sync="TRUE">0.010417</absres>
<ordres Sync="TRUE">0.010417</ordres>
</coordrep>
<plandu Sync="TRUE">survey feet</plandu>
</planci>
<mapproj>
<mapprojn Sync="TRUE">Lambert Conformal Conic</mapprojn>
<lambertc>
<stdparll Sync="TRUE">34.333333</stdparll>
<stdparll Sync="TRUE">36.166667</stdparll>
<longcm Sync="TRUE">-79.000000</longcm>
<latprjo Sync="TRUE">33.750000</latprjo>
<feast Sync="TRUE">2000000.002617</feast>
<fnorth Sync="TRUE">0.000000</fnorth>
</lambertc>
</mapproj>
</planar>
<geodetic>
<horizdn Sync="TRUE">North American Datum of 1983</horizdn>
<ellips Sync="TRUE">Geodetic Reference System 80</ellips>
<semiaxis Sync="TRUE">6378137.000000</semiaxis>
<denflat Sync="TRUE">298.257222</denflat>
</geodetic>
<cordsysn>
<geogcsn Sync="TRUE">GCS_North_American_1983</geogcsn>
<projcsn Sync="TRUE">NAD_1983_StatePlane_North_Carolina_FIPS_3200_Feet</projcsn>
</cordsysn>
</horizsys>
<vertdef>
<altsys>
<altres Sync="TRUE">1.000000</altres>
<altenc Sync="TRUE">Explicit elevation coordinate included with horizontal coordinates</altenc>
</altsys>
</vertdef>
</spref>
<eainfo>
<detailed Name="test_vector.DAVIE.flood_mapfldhazar">
<enttyp>
<enttypl Sync="TRUE">test_vector.DAVIE.flood_mapfldhazar</enttypl>
<enttypd>Polygon Geometry file that is the physical representation of the Flood Mapping Boundaries that are calculated from the Engineering Models</enttypd>
<enttypds>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</enttypds>
<enttypt Sync="TRUE">Feature Class</enttypt>
<enttypc Sync="TRUE">79</enttypc>
</enttyp>
<attr>
<attrlabl>HYDROID</attrlabl>
<attrdef>A code that provides a link to the hydrologic model table, L_HYDROMODEL</attrdef>
<attrdefs>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</attrdefs>
<attrdomv>
<edom>
<edomv>Null</edomv>
<edomvd>A code that provides a link to the hydrologic model table, L_HYDROMODEL</edomvd>
<edomvds>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</edomvds>
</edom>
</attrdomv>
</attr>
<attr>
<attrlabl>ZONE_LID</attrlabl>
<attrdef>Flood zone lookup identification</attrdef>
<attrdefs>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</attrdefs>
<attrdomv>
<codesetd>
<codesetn>D_ZONE</codesetn>
<codesets>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</codesets>
</codesetd>
</attrdomv>
</attr>
<attr>
<attrlabl>Shape</attrlabl>
<attrdef>Feature geometry.</attrdef>
<attrdefs>ESRI</attrdefs>
<attrdomv>
<edom>
<edomv>Polygon</edomv>
<edomvd>Polygons represent area features and are made up of arcs which define the boundary.</edomvd>
<edomvds>ESRI</edomvds>
</edom>
</attrdomv>
</attr>
<attr>
<attrlabl>FLDWAY_LID</attrlabl>
<attrdef>Floodway lookup identification</attrdef>
<attrdefs>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</attrdefs>
<attrdomv>
<codesetd>
<codesetn>D_FLOODWAY</codesetn>
<codesets>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</codesets>
</codesetd>
</attrdomv>
</attr>
<attr>
<attrlabl>SFHA_TF</attrlabl>
<attrdef>Is this a special flood hazard area? 0=False, 1=True</attrdef>
<attrdefs>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</attrdefs>
<attrdomv>
<edom>
<edomv>True or false</edomv>
<edomvd>Is this a special flood hazard area? 0=False, 1=True</edomvd>
<edomvds>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</edomvds>
</edom>
</attrdomv>
</attr>
<attr>
<attrlabl>V_DATM_LID</attrlabl>
<attrdef>Vertical Datum lookup identification</attrdef>
<attrdefs>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</attrdefs>
<attrdomv>
<codesetd>
<codesetn>D_V_DATUM</codesetn>
<codesets>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</codesets>
</codesetd>
</attrdomv>
</attr>
<attr>
<attrlabl>DEPTH</attrlabl>
<attrdef>Depth value. For AO zones, shown beneath the zone label on the FIRM. Usually a whole number between 1 - 3 feet.</attrdef>
<attrdefs>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</attrdefs>
<attrdomv>
<edom>
<edomv>-9999</edomv>
<edomvd>Depth value. For AO zones, shown beneath the zone label on the FIRM. Usually a whole number between 1 - 3 feet.</edomvd>
<edomvds>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</edomvds>
</edom>
</attrdomv>
</attr>
<attr>
<attrlabl>LEN_LID</attrlabl>
<attrdef>Units of linear measure</attrdef>
<attrdefs>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</attrdefs>
<attrdomv>
<codesetd>
<codesetn>D_LENGTH_UNITS</codesetn>
<codesets>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</codesets>
</codesetd>
</attrdomv>
</attr>
<attr>
<attrlabl>VEL_LID</attrlabl>
<attrdef>Velocity measurement. For alluvial fan areas.</attrdef>
<attrdefs>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</attrdefs>
<attrdomv>
<codesetd>
<codesetn>D_VELOCITY_UNITS</codesetn>
<codesets>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</codesets>
</codesetd>
</attrdomv>
</attr>
<attr>
<attrlabl>METAID</attrlabl>
<attrdef>Foreign key to METADATA</attrdef>
<attrdefs>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</attrdefs>
<attrdomv>
<edom>
<edomv>37059200707098</edomv>
<edomvd>Foreign key to METADATA</edomvd>
<edomvds>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</edomvds>
</edom>
</attrdomv>
</attr>
<attr>
<attrlabl>FLD_AR_ID</attrlabl>
<attrdef>Primary key. Defined by mapping contractor using the formula STFIPS + COFIPS + DATE + SEQUENTIAL NUMBER (where date = YYYYMMDD)</attrdef>
<attrdefs>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</attrdefs>
<attrdomv>
<rdom>
<rdommin>37059200707092</rdommin>
<rdommax>370592007070992</rdommax>
</rdom>
</attrdomv>
</attr>
<attr>
<attrlabl>AR_REVERT</attrlabl>
<attrdef>If the area is a ZONE AR, this field would hold the zone the area would revert to if the AR was removed</attrdef>
<attrdefs>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</attrdefs>
<attrdomv>
<edom>
<edomv>NULL</edomv>
<edomvd>If the area is a ZONE AR, this field would hold the zone the area would revert to if the AR was removed</edomvd>
<edomvds>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</edomvds>
</edom>
</attrdomv>
</attr>
<attr>
<attrlabl>CST_MDL_ID</attrlabl>
<attrdef>Foreign key to L_CSTMODEL table</attrdef>
<attrdefs>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</attrdefs>
<attrdomv>
<edom>
<edomv>NULL</edomv>
<edomvd>Foreign key to L_CSTMODEL table</edomvd>
<edomvds>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</edomvds>
</edom>
</attrdomv>
</attr>
<attr>
<attrlabl>BFE_REVERT</attrlabl>
<attrdef>If the area is a ZONE AR, this field would hold the static base flood elevation for the reverted zone.</attrdef>
<attrdefs>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</attrdefs>
<attrdomv>
<edom>
<edomv>NULL</edomv>
<edomvd>If the area is a ZONE AR, this field would hold the static base flood elevation for the reverted zone.</edomvd>
<edomvds>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</edomvds>
</edom>
</attrdomv>
</attr>
<attr>
<attrlabl>DEP_REVERT</attrlabl>
<attrdef>If the area is a ZONE AR, this field would hold that flood depth for the reverted zone.</attrdef>
<attrdefs>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</attrdefs>
<attrdomv>
<edom>
<edomv>NULL</edomv>
<edomvd>If the area is a ZONE AR, this field would hold that flood depth for the reverted zone.</edomvd>
<edomvds>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</edomvds>
</edom>
</attrdomv>
</attr>
<attr>
<attrlabl>STATIC_BFE</attrlabl>
<attrdef>Static base flood elevation</attrdef>
<attrdefs>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</attrdefs>
<attrdomv>
<edom>
<edomv>-9999</edomv>
<edomvd>Static base flood elevation</edomvd>
<edomvds>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</edomvds>
</edom>
</attrdomv>
</attr>
<attr>
<attrlabl>SHAPE</attrlabl>
<attrdef>Feature geometry.</attrdef>
<attrdefs>ESRI</attrdefs>
<attrdomv>
<udom>Coordinates defining the features.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl>VELOCITY</attrlabl>
<attrdef>Velocity measurement. For alluvial fan areas.</attrdef>
<attrdefs>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</attrdefs>
<attrdomv>
<edom>
<edomv>-9999</edomv>
<edomvd>Velocity measurement. For alluvial fan areas.</edomvd>
<edomvds>Geodatabase Design (State of North Carolina, North Carolina Floodplain Mapping Program, 2007)</edomvds>
</edom>
</attrdomv>
</attr>
<attr>
<attrlabl>OBJECTID</attrlabl>
<attrdef>Internal feature number.</attrdef>
<attrdefs>ESRI</attrdefs>
<attrdomv>
<udom>Sequential unique whole numbers that are automatically generated.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">Shape.area</attrlabl>
<attalias Sync="TRUE">Shape.area</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">0</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Shape.len</attrlabl>
<attalias Sync="TRUE">Shape.len</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">0</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
</detailed>
</eainfo>
<distinfo>
<distrib>
<cntinfo>
<cntorgp>
<cntorg>North Carolina Center for Geographic Information and Analysis</cntorg>
</cntorgp>
<cntpos>Production Services</cntpos>
<cntaddr>
<addrtype>mailing and physical address</addrtype>
<address>301 N. Wilmington Street, Suite 700</address>
<city>Raleigh</city>
<state>NC</state>
<postal>27601-2825</postal>
<country>USA</country>
</cntaddr>
<cntvoice>(919) 733-2090</cntvoice>
<cntfax>(919) 715-0725</cntfax>
<cntemail>dataq@ncmail.net</cntemail>
<hours>8:30 AM to 5:30 PM EST</hours>
<cntinst>Phone and email preferred. For current price information visit www.cgia.state.nc.us/cost.html</cntinst>
</cntinfo>
</distrib>
<resdesc>Downloadable Data</resdesc>
<distliab>NCCGIA is charged with the development and maintenance of the State's corporate geographic database and, in cooperation with other mapping organizations, is committed to offering its users accurate, useful, and current information about the state. Although every effort has been made to ensure the accuracy of information, errors and conditions originating from physical sources used to develop the corporate database may be reflected in the data supplied. The client must be aware of data conditions and bear responsibility for the appropriate use of the information with respect to possible errors, original map scale, collection methodology, currency of data, and other conditions specific to certain data. NCCGIA does not support secondary distribution of this data. The use of trade names or commercial products does not constitute their endorsement by the NCCGIA or North Carolina State Government.</distliab>
<stdorder>
<digform>
<digtinfo>
<formname>ASCII</formname>
<formcont>polygon dataset and metadata</formcont>
<filedec>PC-based PKZip compatible products (WinZip, unzip) may be used to decompress the dataset.</filedec>
<transize>2.0-4.0 MB</transize>
</digtinfo>
<digtopt>
<onlinopt>
<computer>
<networka>
<networkr>(To be determined)</networkr>
</networka>
</computer>
</onlinopt>
</digtopt>
</digform>
<fees>For current price information visit www.cgia.state.nc.us/cost.html</fees>
</stdorder>
<custom>Custom data creation and analysis work is available by contract. Contact Production Services at (919) 733-2090.</custom>
<techpreq>Data are supplied in ArcInfo and ASCII formats. Format compatibility is the user's responsibility. For more information visit www.cgia.state.nc.us/cost.html.</techpreq>
</distinfo>
<metainfo>
<metd Sync="TRUE">20080805</metd>
<metc>
<cntinfo>
<cntorgp>
<cntorg>Watershed Concepts</cntorg>
<cntper>David Key</cntper>
</cntorgp>
<cntpos>Project Manager</cntpos>
<cntaddr>
<addrtype>mailing and physical address</addrtype>
<address>3333 Regency Parkway, Suite 120</address>
<city>Cary</city>
<state>NC</state>
<postal>27518</postal>
</cntaddr>
<cntvoice>919-460-6895</cntvoice>
<cntfax>919-460-6896</cntfax>
</cntinfo>
</metc>
<metstdn Sync="TRUE">FGDC Content Standards for Digital Geospatial Metadata</metstdn>
<metstdv Sync="TRUE">FGDC-STD-001-1998</metstdv>
<mettc Sync="TRUE">local time</mettc>
<metextns>
<onlink>http://www.esri.com/metadata/esriprof80.html</onlink>
<metprof>ESRI Metadata Profile</metprof>
</metextns>
<metextns>
<onlink>http://www.esri.com/metadata/esriprof80.html</onlink>
<metprof>ESRI Metadata Profile</metprof>
</metextns>
<metextns>
<onlink>http://www.esri.com/metadata/esriprof80.html</onlink>
<metprof>ESRI Metadata Profile</metprof>
</metextns>
<metextns>
<onlink>http://www.esri.com/metadata/esriprof80.html</onlink>
<metprof>ESRI Metadata Profile</metprof>
</metextns>
<langmeta Sync="TRUE">en</langmeta>
<metextns>
<onlink Sync="TRUE">http://www.esri.com/metadata/esriprof80.html</onlink>
<metprof Sync="TRUE">ESRI Metadata Profile</metprof>
</metextns>
</metainfo>
<Esri>
<CreaDate>20100302</CreaDate>
<CreaTime>11015700</CreaTime>
<SyncOnce>FALSE</SyncOnce>
<SyncDate>20080805</SyncDate>
<SyncTime>16505900</SyncTime>
<ModDate>20080805</ModDate>
<ModTime>16505900</ModTime>
<DataProperties>
<lineage>
<Process Date="20080805" Name="FeatureClassToFeatureClass_4" Time="134925" ToolSource="C:\Program Files\ArcGIS\ArcToolbox\Toolboxes\Conversion Tools.tbx\FeatureClassToFeatureClass">FeatureClassToFeatureClass D:\Shapefiles\NCFMP\Davie_PGDB\Davie_PGDB.mdb\MAPPING\MAPFLDHAZAR "Database Connections\davie@test_vector.sde\test_vector.DAVIE.Environmental" flood_mapfldhazar # "FLD_AR_ID FLD_AR_ID true true false 25 Text 0 0 ,First,#,D:\Shapefiles\NCFMP\Davie_PGDB\Davie_PGDB.mdb\MAPPING\MAPFLDHAZAR,FLD_AR_ID,-1,-1;HYDROID HYDROID true true false 25 Text 0 0 ,First,#,D:\Shapefiles\NCFMP\Davie_PGDB\Davie_PGDB.mdb\MAPPING\MAPFLDHAZAR,HYDROID,-1,-1;ZONE_LID ZONE_LID true true false 5 Text 0 0 ,First,#,D:\Shapefiles\NCFMP\Davie_PGDB\Davie_PGDB.mdb\MAPPING\MAPFLDHAZAR,ZONE_LID,-1,-1;FLDWAY_LID FLDWAY_LID true true false 5 Text 0 0 ,First,#,D:\Shapefiles\NCFMP\Davie_PGDB\Davie_PGDB.mdb\MAPPING\MAPFLDHAZAR,FLDWAY_LID,-1,-1;SFHA_TF SFHA_TF true true false 2 Short 0 0 ,First,#,D:\Shapefiles\NCFMP\Davie_PGDB\Davie_PGDB.mdb\MAPPING\MAPFLDHAZAR,SFHA_TF,-1,-1;V_DATM_LID V_DATM_LID true true false 5 Text 0 0 ,First,#,D:\Shapefiles\NCFMP\Davie_PGDB\Davie_PGDB.mdb\MAPPING\MAPFLDHAZAR,V_DATM_LID,-1,-1;LEN_LID LEN_LID true true false 5 Text 0 0 ,First,#,D:\Shapefiles\NCFMP\Davie_PGDB\Davie_PGDB.mdb\MAPPING\MAPFLDHAZAR,LEN_LID,-1,-1;VEL_LID VEL_LID true true false 5 Text 0 0 ,First,#,D:\Shapefiles\NCFMP\Davie_PGDB\Davie_PGDB.mdb\MAPPING\MAPFLDHAZAR,VEL_LID,-1,-1;AR_REVERT AR_REVERT true true false 6 Text 0 0 ,First,#,D:\Shapefiles\NCFMP\Davie_PGDB\Davie_PGDB.mdb\MAPPING\MAPFLDHAZAR,AR_REVERT,-1,-1;CST_MDL_ID CST_MDL_ID true true false 25 Text 0 0 ,First,#,D:\Shapefiles\NCFMP\Davie_PGDB\Davie_PGDB.mdb\MAPPING\MAPFLDHAZAR,CST_MDL_ID,-1,-1;BFE_REVERT BFE_REVERT true true false 8 Double 0 0 ,First,#,D:\Shapefiles\NCFMP\Davie_PGDB\Davie_PGDB.mdb\MAPPING\MAPFLDHAZAR,BFE_REVERT,-1,-1;DEPTH DEPTH true true false 8 Double 0 0 ,First,#,D:\Shapefiles\NCFMP\Davie_PGDB\Davie_PGDB.mdb\MAPPING\MAPFLDHAZAR,DEPTH,-1,-1;DEP_REVERT DEP_REVERT true true false 8 Double 0 0 ,First,#,D:\Shapefiles\NCFMP\Davie_PGDB\Davie_PGDB.mdb\MAPPING\MAPFLDHAZAR,DEP_REVERT,-1,-1;STATIC_BFE STATIC_BFE true true false 8 Double 0 0 ,First,#,D:\Shapefiles\NCFMP\Davie_PGDB\Davie_PGDB.mdb\MAPPING\MAPFLDHAZAR,STATIC_BFE,-1,-1;VELOCITY VELOCITY true true false 8 Double 0 0 ,First,#,D:\Shapefiles\NCFMP\Davie_PGDB\Davie_PGDB.mdb\MAPPING\MAPFLDHAZAR,VELOCITY,-1,-1;METAID METAID true true false 25 Text 0 0 ,First,#,D:\Shapefiles\NCFMP\Davie_PGDB\Davie_PGDB.mdb\MAPPING\MAPFLDHAZAR,METAID,-1,-1;SHAPE_Length SHAPE_Length false true true 8 Double 0 0 ,First,#,D:\Shapefiles\NCFMP\Davie_PGDB\Davie_PGDB.mdb\MAPPING\MAPFLDHAZAR,SHAPE_Length,-1,-1;SHAPE_Area SHAPE_Area false true true 8 Double 0 0 ,First,#,D:\Shapefiles\NCFMP\Davie_PGDB\Davie_PGDB.mdb\MAPPING\MAPFLDHAZAR,SHAPE_Area,-1,-1" # "Database Connections\davie@test_vector.sde\test_vector.DAVIE.Environmental\test_vector.DAVIE.flood_mapfldhazar"</Process>
</lineage>
</DataProperties>
<MetaID>{6A6DE647-03A5-405A-A324-EB711A1AF68B}</MetaID>
</Esri>
<dataIdInfo>
<envirDesc Sync="TRUE">Microsoft Windows 2000 Version 5.0 (Build 2195) Service Pack 4; ESRI ArcCatalog 9.2.2.1350</envirDesc>
<dataLang>
<languageCode Sync="TRUE" value="en"/>
</dataLang>
<idCitation>
<resTitle Sync="TRUE">Flood Hazard Zones</resTitle>
<presForm>
<PresFormCd Sync="TRUE" value="005"/>
</presForm>
</idCitation>
<spatRpType>
<SpatRepTypCd Sync="TRUE" value="001"/>
</spatRpType>
<dataExt>
<geoEle>
<GeoBndBox esriExtentType="native">
<westBL Sync="TRUE">1493929.822917</westBL>
<eastBL Sync="TRUE">1595691.114583</eastBL>
<northBL Sync="TRUE">844929.71875</northBL>
<southBL Sync="TRUE">728542.354167</southBL>
<exTypeCode Sync="TRUE">1</exTypeCode>
</GeoBndBox>
</geoEle>
</dataExt>
<geoBox esriExtentType="decdegrees">
<westBL Sync="TRUE">-80.712203</westBL>
<eastBL Sync="TRUE">-80.362556</eastBL>
<northBL Sync="TRUE">36.063857</northBL>
<southBL Sync="TRUE">35.73983</southBL>
<exTypeCode Sync="TRUE">1</exTypeCode>
</geoBox>
<idAbs/>
<searchKeys>
<keyword>Davie County</keyword>
<keyword>GIS</keyword>
<keyword>Flood Hazard Zones</keyword>
</searchKeys>
<idPurp>This web layer is intended to provide information on flood hazard zones in Davie County, NC.</idPurp>
<idCredit/>
<resConst>
<Consts>
<useLimit/>
</Consts>
</resConst>
</dataIdInfo>
<mdLang>
<languageCode Sync="TRUE" value="en"/>
</mdLang>
<mdStanName Sync="TRUE">ISO 19115 Geographic Information - Metadata</mdStanName>
<mdStanVer Sync="TRUE">DIS_ESRI1.0</mdStanVer>
<mdChar>
<CharSetCd Sync="TRUE" value="004"/>
</mdChar>
<mdHrLv>
<ScopeCd Sync="TRUE" value="005"/>
</mdHrLv>
<mdHrLvName Sync="TRUE">dataset</mdHrLvName>
<distInfo>
<distributor>
<distorTran>
<onLineSrc>
<orDesc Sync="TRUE">002</orDesc>
<linkage Sync="TRUE">file://Service=sde:sqlserver:svr_gis_main; Database=davie_vector; User=davie; Version=sde.DEFAULT</linkage>
<protocol Sync="TRUE">Local Area Network</protocol>
</onLineSrc>
</distorTran>
<distorFormat>
<formatName Sync="TRUE">SDE Feature Class</formatName>
</distorFormat>
</distributor>
</distInfo>
<refSysInfo>
<RefSystem>
<refSysID>
<identCode Sync="TRUE">NAD_1983_StatePlane_North_Carolina_FIPS_3200_Feet</identCode>
</refSysID>
</RefSystem>
</refSysInfo>
<spatRepInfo>
<VectSpatRep>
<topLvl>
<TopoLevCd Sync="TRUE" value="001"/>
</topLvl>
<geometObjs Name="test_vector.DAVIE.flood_mapfldhazar">
<geoObjTyp>
<GeoObjTypCd Sync="TRUE" value="001"/>
</geoObjTyp>
<geoObjCnt Sync="TRUE">79</geoObjCnt>
</geometObjs>
</VectSpatRep>
</spatRepInfo>
<mdDateSt Sync="TRUE">20080805</mdDateSt>
<Binary>
<Thumbnail>
<Data EsriPropertyType="PictureX">/9j/4AAQSkZJRgABAQEAAQABAAD/2wBDAAgGBgcGBQgHBwcJCQgKDBQNDAsLDBkSEw8UHRofHh0a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</Data>
</Thumbnail>
</Binary>
</metadata>
